ProductsDiagnostic/Testing EquipmentWireless ChassicEAR Transmitter LeadClamp Replacement 4-pack

Write A Review

Wireless ChassicEAR Transmitter LeadClamp Replacement 4-pack


Material: Rubber, Steel
Overall Dimensions: 5.75 in. x 5.00 in. x 2.50 in.
Item Weight (lb.): 0.42
Warranty: 90 Day Limited Warranty
Country of Origin: China

SKU 97202-08
  • Description


    The STEELMAN Wireless ChassisEAR Lead/Clamp 4-Pack is a set of replacement cables for the STEELMAN 97202 Wireless ChassisEAR. These four replacement clamp microphones amplify and transmit sounds to the wireless transmitters, allowing users to listen to trouble noises and perform real-time diagnostics during road tests. Using one or all four microphone clamps, you can easily pinpoint the exact location of noises that signal damaging wear and possible part failure that cannot be duplicated in the garage repair stall or heard with a standard mechanic’s stethoscope. Each of the clamps is made from durable steel with a 2-foot (24-inch) insulated wire lead cable that gives you enough reach to securely mount the transmitter to a solid location and run the clamp to difficult vehicle locations. Sensors easily clamp onto problem areas of cars and trucks, including springs, torque rods, shocks, body mounts, brakes, dash assemblies, door hinges, drive trains, axles, transmissions, transfer cases, suspensions, sway bars, struts, axle hubs, ring bearings, mufflers, catalytic converters, O2 sensors, A/T cases, CV joints, fuel injectors, gears, oil pumps, and more.

  • Additional Information

    Additional Information

    • 4-PACK – replacement pack of 4 microphone clamps for the STEELMAN Wireless ChassisEar Diagnostic Device Kit
    • PINPOINT TROUBLING NOISES – Easily pinpoint troubling noises that cannot be duplicated in a repair stall and only occur during road driving
    • 2-FOOT CABLES – 2-foot (24-inch) long wire leads provide the length you need to mount wireless transmitters securely yet still be able to reach trouble spots
    • STEEL ALLIGATOR CLAMPS – Alligator style clamps are made of durable steel with a sturdy jaw for maximum hold strength
    • INSULATED WIRE LEADS – Insulated cables on the wire leads protect against signal interference and damage during use
    • CLAMPS ONLY – Clamps are for use with ChassisEAR diagnostics system part number 97202 (sold separately)
  • Reviews (0)

    Reviews (0)


    There are no reviews yet.

    Be the first to review "Wireless ChassicEAR Transmitter LeadClamp Replacement 4-pack"

    Only logged in users can leave a review.

Got A Question?

Have an enquiry? Please do not hesitate to reach out to us